Js Waterproof Concrete Interfacial Agent Adhesive

• Customization: Available
• Bonding Function: Concrete Interface Agent
• Morphology: Water Emulsion
• Model NO.: LH914
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
• Material: Vae
• Classification: Room Curing
• Main Agent Composition: Vinyl Acetate
• Characteristic: Waterproof
• Promoter Composition: Emulsifier
• Composition: Organic Material
• Color: White
• Solid Content: 4.5%~56.5%
• 1% Liquid pH (20ºC): 4.0~6.5
• Viscosity: 2500~4500 MPa.S
• Glass Transition Temperature: 0ºC
• Transport Package: 50kg Plastic Drum or 1000kg IBC Drum
• Specification: 1000KG
• Trademark: XYHCHEM
• Origin: Nanjing, Jiangsu, China
• HS Code: 3824409000
• Production Capacity: 5000 Tons/Year
• Package Size: 200.00cm * 200.00cm * 200.00cm
• Package Gross Weight: 1000.000kg
• Lead Time: 7 days (1 - 1000 kg) ; 10 days (1001 - 10000 kg) ; 15 days (10001 - 20000 kg) ; To be negotiated ( > 20000 kg)

Product Description

Product Description

Interfacer is a kind of adhesive used to improve the bonding effect between the repair material and the substrate. It can effectively improve the bonding strength between concrete and other materials, thus enhancing the stability and durability of the overall structure. Interfacer is widely used in various fields such as construction, road, bridge, etc. It is often used to treat the concrete surface and improve the bond between concrete and plastering mortar or other coating materials.

Features

1. Two-way penetration bonding, resulting in radioactive chain anchoring effect will be two-way material permanently and firmly bonded together.
2. Highly soft and toughness and good air permeability, resistance to freezing and thawing, water resistance, aging resistance, non-toxic, tasteless, non-polluting, green environmental protection products.
3. Acid and alkali resistance and weather resistance, good adaptability and affinity with acid and alkaline materials.
4. It can be constructed and hardened under humid environment, and the construction is simple and fast.

LH914
Concrete Interface Agent

Liquid LH914 is a low formaldehyde, low odor vinyl acetate-ethylene copolymer emulsion. The emulsion has good dispersibility to cement and filler, and has good waterproof performance. It is mainly used in JS1 and JS2 waterproof coatings, and has good mechanical properties.

 

Product characteristics

LH914 Good compatibility with cement and fillers:

1. Mixed with cement, it can improve the flexural resistance of concrete.
2. LH914 has good compatibility with cement and filler and has less effect on cement hydration.
3. It has good tensile strength and elongation in waterproof coatings and excellent adhesive strength.
4. LH914 has good compatibility with common pigmented fillers and is easy to process.
5. LH914 has a minimum film-forming temperature of 0°C, so there is no need for film-forming additives or small amounts of film-forming additives in the formulation.

 

Technical Data

Appearance	Milky white liquid
solid content	54.5%~56.5%
1% liquid pH (20ºC)	4.0~6.5
viscosity	2500~4500 mPa.s
glass transition temperature	0ºC

Recommended dosage:

1. It can be sprayed on the surface of the base layer to be treated or the heat preservation board by roller painting or mechanical spraying.
2. Cement: sand: interface agent = 1:2:0.5 ratio of mixing and stirring, directly coated on the surface of the grass-roots level to be treated.

Scope of application

1. Concrete, aerated concrete.
2. Mini-Block, Lightweight Partition Walls, Brickwork Walls.
3. Putty batching, tile bonding, masonry back coating.
4. Pre-treatment of grass-roots interface for insulation panels, etc.

Usage and Precautions

1. The construction environment must be dry, the relative humidity should be less than 70%, and well ventilated. The temperature of the base surface and the environment should not be lower than +5ºC.
2. Base surface preparation: the base surface should be clean, not loose, no dust, grease, moss, carpet glue should be removed, loose and cracked parts should be chiseled and repaired in advance.
3. Stirring: The proportion should be stirred by electric equipment, and stirred into uniform thin paste.
4. Painting and drying: Use a roller or brush to paint the slurry onto the base surface, not to miss the brush, and then let the painted surface dry (about 12 hours).
5. Maintenance and finished product protection: must strengthen the ventilation, natural maintenance can be, until the slurry solid dry (the surface becomes gray-black) and confirm that the base surface is completely closed, before the subsequent processes.
6. Cleaning of tools The solidified paste is difficult to remove. Tools should be cleaned with water as soon as possible after use.

packaging and storage

1. 50KG plastic packing drum or BIC ton dru, the storage period is 12 months from the date of production, if it exceeds the shelf life, it must be verified by test and inspection before use;
2. Place in a ventilated and dry place for storage, pay attention to moisture-proof treatment, avoid direct sunlight, use it in time after opening, and seal it in time if it is not used up to prevent moisture absorption and deterioration.
3. Prolonged storage will have delamination, mold phenomenon, before use can be stirred evenly, does not affect the use of the effect.
4. Paint evenly, there should be no leakage.
5. The operation environment temperature should be above 5ºC.

Our Advantages

Transportation options

FAQ:
1,LH914 Applicable objects?
Concrete, aerated concrete,Mini-Block, Lightweight Partition Walls, Brickwork Walls,Putty batching, tile bonding, masonry back coating.,Pre-treatment of grass-roots interface for insulation panels, etc.

2,What is the minimum order quantity of LH914?
The minimum order quantity is 1 barrel (50KG), the more the quantity, the lower the transportation cost, the price will be relatively friendly.

3,Samples and technical support?
Our company provides samples for free, the express cost is responsible by the customer, our company has a professional technical team to solve the related problems for the customers, our technical team has been deeply engaged in China's construction industry for 20 years, and has a wealth of experience.

4,Where to ship the samples and goods?
Our factory and company are in Nanjing, Jiangsu Province, and the shipment place is also Nanjing, Jiangsu Province.