Water Reducing Agent SMF Melamine Based Melment Superplasticizer Powder Price Concrete Admixture

Product Description

Product Description

CP1000
Melamine water reducing agent 
Concrete Admixture Melamine Based Superplasticizer SMF Water Reducing Agent
 

CP1000 (Melamine water reducing agent )

Melamine, commonly known as melamine and protein essence, has a molecular formula of C3H6N6, and is named "1,3,5-triazine-2,4,6-triamine" by IUPAC. It is a triazine nitrogen-containing heterocyclic organic compound, usually used as a chemical raw material. CP1000 is a polymer-condensed superplasticizer for flowable and high-strength cementitious or gypsum-based mortars. CP1000 can give the mortar rapid plasticization, high fluidization effect and low air entrainment. CP1000 has good compatibility with different cement, gypsum cementitious materials and other additives such as defoamer, thickener, retarder, expansion agent, hardening accelerator, etc.

Product characteristics

1. High-efficiency water reduction:

Melamine water reducing agent is a kind of water-soluble anionic polymer dielectric, which has strong adsorption and dispersion effect on cement. This water reducing agent can significantly increase the water reduction rate of concrete, reduce the water-cement ratio, thus improving the fluidity and working performance of concrete.
 

2. Non-air-entraining type:

elamine water reducing agent belongs to the non-air-entraining type, i.e., it will not introduce additional air bubbles in the concrete, thus avoiding the influence of air bubbles on the strength and durability of concrete.
 

3. Low Chloride Ion Content:

The low chloride ion content of this water reducing agent does not have a corrosive effect on steel reinforcement. This helps protect reinforcing steel in concrete from corrosion and damage.
 

4. Adaptability:

Melamine water reducing agents are well adapted to a wide range of cements and can be used in different cement types and construction conditions.
 

5. Improvement of concrete performance:

After using melamine water reducing agent, the early strength and impermeability of concrete are significantly improved, the workability and water retention are better, and the steam curing is well adapted. This helps to improve the overall performance and durability of concrete.
 

Technical Data

 

Appearance	white to light yellow powder
Bulk density	400-700kg/m3
Water content	≤ 5%
SO4^2-content	3~4%
10% liquid pH value (20°C)	7-9
chloride ion content	≤ 0.05%

Recommended dosage: 0.05~0.50% of the total amount of gelling material, according to the type of raw material and the demand for appropriate mixing to determine the appropriate dosage.

Scope of application

CP1000 melamine water reducing agent is a super plasticizer with polymer condensation. It is widely used in cement-based or gypsum-based mortars with fluidity and high strength, especially in the following cases:
 

1. Mobile mortar for pouring:

Adding CP1000 to self-leveling mortar can significantly improve the fluidity and self-leveling performance of the mortar, so that the ground can quickly reach a flat effect, reduce the workload of manual leveling and mechanical vibration, and improve construction efficiency.
 

2. Gypsum mortar:

CP1000 can effectively improve the slurry fluidity of gypsum interior partition board, reduce porosity, and improve the density and strength of the board. At the same time, by optimizing the ratio, it can also improve the sound insulation and heat insulation performance of the board to meet the high quality requirements of the building interior partition board.
 

3. Steam cured concrete:

In the production of gypsum flue products, CP1000 can improve the fluidity and plasticity of the slurry, make the products more uniform and dense, and reduce the generation of cracks and pores. At the same time, it improves the high temperature resistance and durability of the product, ensuring the safe and stable operation of the flue system.
 

4. High-strength gypsum products:

For high-strength gypsum products, CP1000 can significantly improve the strength and durability of the products. By optimizing the ratio and addition amount, CP1000 can reduce the porosity of the product and increase the density, thereby enhancing the mechanical properties of the product such as compression and flexural resistance.
 

5. Other dry mix mortar or concrete:

In addition to the application scenarios mentioned above, CP1000 is also suitable for the production of other types of gypsum products, such as gypsum sculptures, gypsum molds, gypsum lines, etc. The wide applicability of CP1000 enables it to meet the performance requirements of gypsum products in different fields and scenarios.

Usage and Precautions

1. When using, need to be mixed with other dry powder components together, when using according to the construction of different areas of mixing requirements for mixing and construction;

2. The recommended dosage is 0.05-0.50% of the cementitious material, and the specific dosage is determined by trial mixing according to the application system and the change of dry mix components;

3. In low dosage when the system has good dispersion and fluidity; when the dosage is greater than 0.10% to 0.25%, the fluidity has a very obvious growth, pay attention to control the accuracy of the dosage.
 

packaging and storage

1. Packed in paper-plastic composite bag, 25kg/bag, the storage period is 12 months from the date of production, if it exceeds the shelf life, it must be verified by test and inspection before use; 
2. Place in a ventilated and dry place for storage, pay attention to moisture-proof treatment, avoid direct sunlight, use it in time after opening, and seal it in time if it is not used up to prevent moisture absorption and deterioration.

Transportation options

FAQ

1,CP1000 Applicableobjects?
Fluidized mortar, gypsum mortar, and steam-cured concrete for grouting;
Other dry mortar or concrete

2,What is the minimum order quantity of CP1000?
The minimum order quantity is 1 package (25KG), when the quantity is more, the transportation cost will be lower, so the price will be relatively friendly.

3,Samples and technical support?
Our company provides samples for free, the express cost is responsible by the customer, our company has a professional technical team to solve the related problems for the customers, our technical team has been deeply engaged in China's construction industry for 20 years, and has a wealth of experience.

4,Where to ship the samples and goods?
Our factory and company are in Nanjing, Jiangsu Province, and the shipment place is also Nanjing, Jiangsu Province.